GE NetworX NX-8-EUR Installation Manual page 67

LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR CODES, SLOW
SPEED FORMATS ONLY (4 segments, numerical data)
Location 74 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if
"Expander Trouble Reporting" is enabled. Segment 1 contains the tens digit of the "Expander
Trouble Reporting". Segment 2 contains the ones digit of the "Expander Trouble Reporting".
Segment 3 contains the tens digit of the "Expander Trouble Restore". Segment 4 contains the
ones digit of the "Expander Trouble Restore".
For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.
LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,
numerical data)
Location 75 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if the
"Fail To Communicate Reporting" is enabled. Segment 1 contains the tens digit, and segment 2
contains the ones digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
LOCATION 76 - LOG FULL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical data)
Location 76 contains the tens and ones digits for a 4+2 and 3+1 format if the "Log Full
Reporting" is enabled. Segment 1 contains the tens digit, and segment 2 contains the ones
digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
LOCATION 77 - OPENING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments, numerical data)
Location 77 contains the tens digit for a 4+2 and 3+1 format if "Opening Reporting" is enabled.
The ones digit is the ones digit of the user number that did the opening. If the user is greater
than 9, the numbers will begin repeating (e.g. code 6 = 6, code 45 = 5).
This location contains 8 segments. Any segment left as "0" will follow the segment 1 selection.
If you need to report openings and closings with a unique code per user, Contact ID or SIA
format must be used.
Segment 1
Segment 2
Segment 3
Segment 4
Segment 5
Segment 6
Segment 7
Segment 8
NX-8-EUR Installation manual
Opening code for partition 1
Opening code for partition 2
Opening code for partition 3
Opening code for partition 4
Opening code for partition 5
Opening code for partition 6
Opening code for partition 7
Opening code for partition 8
Page 67 02/07/06