GE NetworX NX-8-EUR Installation Manual page 50

LOCATION 25 - ZONES 1-8 CONFIGURATION GROUP (8 segments, numerical data)
Location 25 contains the configuration group (zone type) for zones 1-8. Segment 1 is for zone
1, and segment 8 is for zone 8. You will find the default configurations in the table above.
LOCATION 26 - PARTITION SELECT, ZONES 1-8 (8 segments, feature selection data)
Location 26 is used to select the partition(s) in which zones 1 - 8 reside. A zone may reside in
any combination of the 8 partitions. If a burglary zone resides in more than 1 partition, that
zone will only be active when all the partitions in which it is resident in are armed. A zone that
resides in more than 1 partition will be reported to its lowest partition number. Location 26 has
8 segments. Segment 1 corresponds to zone 1, and segment 8 corresponds to zone 8.
Segment 1-8
LOCATION 27 - ZONES 9-16 CONFIGURATION GROUP (8 segments, numerical data)
Location 27 contains the configuration group (zone type) for zones 9 -16. Segment 1 is for
zone 9, and segment 8 is for zone 16. You will find the default configurations in the table
above.
LOCATION 28 - PARTITION SELECT, ZONES 9-16 (8 segments, feature selection data)
Location 28 is used to select the partition(s) in which zones 9-16 reside. A zone may reside in
any combination of the 8 partitions. If a burglary zone resides in more than 1 partition, that
zone will only be active when all the partitions are armed. A zone that resides in more than 1
partition will be reported to its lowest partition. Location 28 has 8 segments. Segment 1
corresponds to zone 9 and Segment 8 corresponds to zone 16.
Segment 1-8
NX-8-EUR Installation manual
1 = Partition 1
2 = Partition 2
3 = Partition 3
4 = Partition 4
5 = Partition 5
6 = Partition 6
7 = Partition 7
8 = Partition 8
1 = Partition 1
2 = Partition 2
3 = Partition 3
4 = Partition 4
5 = Partition 5
6 = Partition 6
7 = Partition 7
8 = Partition 8
Page 50 02/07/06