Sunvts Diagnostic Software; Table 4-9 Sunvts Tests; Table B-1 Sunvts Documentation - Sun Microsystems GigabitEthernet FC-AL/P Combination Adapter Installation Manual

SunVTS Diagnostic Software

The SunVTS software executes multiple diagnostic hardware tests from a single user
interface. It is used to verify the configuration and functionality of most hardware
controllers and devices. The SunVTS software operates primarily from a graphical
user interface, enabling you to set test parameters while a diagnostic test operations
are being performed.
The following SunVTS tests can be used to test the Sun GigabitEthernet FC-AL/P
Combination adapter:
TABLE 4-9
SunVTS Test
nettest
gemtest
disktest
Note – Do not run nettest and gemtest at the same time.
To use these diagnostic tests, you must have the SunVTS software installed on your
system. Refer to the Solaris Sun Hardware Platform Guide for SunVTS installation
instructions.
Refer to the SunVTS documentation (listed in
run and monitor these diagnostic tests. These documents are available on the Solaris
on Sun Hardware AnswerBook, which is provided on the Solaris Supplement CD for
the Solaris release on your system.
TABLE B-1
Title
SunVTS User's Guide
SunVTS Test Reference Manual
SunVTS Quick Reference
48 Sun GigabitEthernet FC-AL/P Combination Adapter Installation Guide • March 2000
SunVTS Tests
Description
Checks all the networking interfaces on a system, including the Sun
GigabitEthernet FC-AL/P Combination adapter.
Provides functional test coverage of the Sun GigabitEthernet
adapters, including the Sun GigabitEthernet FC-AL/P Combination
adapter. The gemtest provides better fault isolation as compared
to nettest.
Verifies the functionality of hard disk drives.
SunVTS Documentation
TABLE B-1
Description
Describes the SunVTS environment
Describes each SunVTS test; provides various test
options and command-line arguments
Provides an overview of the user interface
) for instructions on how to