Sun Microsystems GigabitEthernet FC-AL/P Combination Adapter Installation Manual page 32

To make sure that the device you just installed is a Sun GigabitEthernet FC-AL/P
Combination adapter, view the .properties output and verify that the
board-model property is 501-5426.
ok .properties
assigned-addresses
local-mac-address
shared-pins
board-rev
board-model
model
has-fcode
version
device_type
address-bits
max-frame-size
reg
gem-rev
compatible
name
fcode-rom-offset
66mhz-capable
fast-back-to-back
devsel-speed
class-code
interrupts
max-latency
min-grant
subsystem-id
revision-id
device-id
vendor-id
Note – If you are going to set the local-mac-address property, note the
local-mac-address of your device at this time. See "Setting the local-mac-address
Property" on page 16 for more information.
14 Sun GigabitEthernet FC-AL/P Combination Adapter Installation Guide • March 2000
82812010 00000000 00200000 00000000 00009060
08 00 20 8e 00 dc
serdes
00 00 00 06
501-5426
SUNW,pci-gem
1.2
network
00 00 00 30
00 00 40 00
00812000 00000000 00000000 00000000 00000000
02812010 00000000 00000000 00000000 00009060
00 00 00 01
70 63 69 31 30 38 65 2c 32 62 61 64 00 70 63 69
network
00000000
00000002
00020000
00000001
00000040
00000040
00000001
00000001
00002bad
0000108e