Sun Microsystems GigabitEthernet FC-AL/P Combination Adapter Installation Manual page 33

6. Make sure that the adapter recognizes the peripheral devices.
Use the show-devs command to locate the host adapter directory and the
show-children command to display the FC-AL devices connected to your adapter.
ok show-devs
/SUNW,UltraSPARC-II@0,0
/counter-timer@1f,1c00
/pci@1f,2000
/pci@1f,4000
/virtual-memory
/memory@0,60000000
/aliases
/options
/openprom
/chosen
/packages
/pci@1f,2000/pci@1
/pci@1f,2000/pci@1/SUNW,ifp@5
/pci@1f,2000/pci@1/network@4
/pci@1f,2000/pci@1/SUNW,ifp@5/ses
/pci@1f,2000/pci@1/SUNW,ifp@5/ssd
. . .
ok select /pci@1f,2000/pci@1/SUNW,ifp@5
ok show-children
LiD HA --- Port WWN --- --- Disk description ---
1d 1d 5080020000007c22
10 10 21000020370710ac
11 11 2100002037076b25
12 12 2100002037072a4f
13 13 21000020370729fe
14 14 21000020370751a1
15 15 2100002037075299
16 16 2100002037075302
...
In the example, /pci@1f,2000/pci@1/SUNW,ifp@5 is the Sun GigabitEthernet
FC-AL/P Combination adapter in an Ultra 30 system and the disks shown by using
the show-children command are in a Sun StorEdge A5000 array (SENA).
SUN SENA
SEAGATE ST19171FCSUN9.0G10789735C05778
SEAGATE ST19171FCSUN9.0G10789735H45113
SEAGATE ST19171FCSUN9.0G10789735D25090
SEAGATE ST19171FCSUN9.0G10789735C59513
SEAGATE ST19171FCSUN9.0G10789735E83001
SEAGATE ST19171FCSUN9.0G10789735E83803
SEAGATE ST19171FCSUN9.0G10789735E83720
1.05P|
Chapter 2 Installing the Adapter 15