Verifying The Sun Storedge A5000 Array Firmware; Figure 2-1 Checking The Storedge A5000 Array Interface Board Firmware Level - Sun Microsystems GigabitEthernet FC-AL/P Combination Adapter Installation Manual

Verifying the Sun StorEdge A5000 Array
Firmware
If you are planning to connect the Sun GigabitEthernet FC-AL/P Combination
adapter to a Sun StorEdge A5000 array, ensure that the firmware level of the
interface board is at least 1.09.
Use the Sun StorEdge A5000 array front panel module (FPM) to check the
interface board firmware level.
Menu screen
Checking the StorEdge A5000 Array Interface Board Firmware Level
FIGURE 2-1
If the StorEdge A5000 array firmware level is less than 1.09, you must upgrade the
firmware using an SBus-based host system before you can connect the array to the
Sun GigabitEthernet FC-AL/P Combination adapter. Visit the sunsolve.sun.com
website to download the latest firmware patch.
Interface board
level 2 screen
Firmware revision
must be at
least 1.09.
Interface board
level 3 screen
Chapter 2 Installing the Adapter 9