10.12 Save & Exit Setup
Save & Exit Setup allows you to save all modifications you have speci-
fied into the CMOS memory. Highlight this option on the Main Menu and
the following message appears:
"Y" is for "Yes", and "N" is for "No".
Press <Enter> key to save the configuration changes.
10.13 Exit Without Saving
Exit Without Saving option allows you to exit the Setup Utility without
saving the modifications that you have specified. Highlight this option on
the Main Menu and the following message appears:
"Y" is for "Yes", and "N" is for "No".
You may change the prompt to "Y" and press <Enter> key to leave this
option .
IPPC-9151 Series Users Manual
"Save to CMOS and Exit (Y/N) ? Y "
"Quit Without Saving (Y/N) ? N "
94