Advantech IPPC-9151 Series User Manual page 60

You must also have one of the following PenMount Serial Interface con-
troller boards installed: 90A4, 9026B, 9036 or 9084. Contents of the Pen-
Mount Windows 2000/XP driver folder are listed below.
DMC9000.inf
DMC9000.sys
DMC9000.cat
SETUP.EXE
If you have an older version of the PenMount Windows 2000/XP driver
installed in your system, please remove it first. Follow the steps below to
install the PenMount Windows 2000/XP driver.
1. When the system first detects the controller board, a screen appears
that shows "Unknown Device." Do not use this hardware wizard.
Press Cancel.
IPPC-9151 Series Users Manual 48