Preparing The Simulator For Üse - GE 325 Product Manual

SECTION 4
PREPARING THE SIMULATOR FOR USE
1. Ensure the Model 325 Simulator Power switch is in the off
position.
2. Connect the detachable line cord to the rear panel power
connector; plug the other end into a hospital-grade
grounded wall outlet of appropriate voltage.
3. Ensure the monitor Power switch is in the off position.
4. Connect one end of the interconnect cable to the
simulator's Fetal Monitor connector.
5. Connect the sub-cables of the other end into the desired
color-coded connectors on the maternal/fetal monitor:
FECG/MECG, US, and UA.
6. Turn on the maternal/fetal monitor.
120V ~ 50-60 Hz
15 WATTS
4-2 + Operation