Tm Configuration (Omron Plc) - Emerson Aventics EtherCAT 580 Technical Manual

TM
580 EtherCAT Technical Manual
8.5 Aventics 580 EtherCAT TM configuration (Omron PLC)
The following example illustrates the necessary steps to add an Aventics 580 EtherCAT TM Manifold to an
existing Omron PLC configuration. This includes how to install the Aventics EtherCAT TM XML file and how
to select the various software components to configure a 580 Manifold (XML files are available at
www.emerson.com). The following examples assume an existing configuration based on Omron Sysmac
Studio (V 1.13).
Install the Aventics 580 XML file
Copy the current Aventics XML file into the following Sysmac Studio directory.
Program Files\Omron\Sysmac Studio\IODeviceProfiles\EsiFiles\UserEsiFiles
Launch Sysmac Studio
TD580ECTM1-3EN 09/2021
Subject to change without notice
8-73
www.emerson.com
Distributed by Valin Corporation | www.valin.com | (800) 774-5630 | customerservice@valin.com