Table of Contents
Advertisement
Safety Precautions
Before using this product, please read this manual and the relevant manuals carefully and pay attention to safety and
product application. The following symbols are used in the manual to identify important safety, installation, and application
information.
CAUTION
The CAUTION symbol indicates a possible hazard which may cause injury or equipment damage. Please review and take
appropriate action.
NOTE!
The NOTE symbol indicates important information regarding equipment installation and setup. Please review and take
appropriate action.
Electrical Installation And Operational Guidelines
AVENTICS
Class 2 power source.
All AVENTICS communication nodes should be grounded during the installation process. Proper
grounding guidelines can be found in National Electrical code IEC 60204-1 or EN 60204-1.
All AVENTICS 580 Electronics Products must only be installed or wired in accordance with ASCO
AVENTICS published instructions and applicable electrical codes.
When using MULTIPLE CLASS 2 POWER SOURCES all sources shall be Listed and rated suitable
for parallel interconnection.
All field wiring shall be suitable for Class 1, Electric Light and Power, or if Class 2, 3 wirings, such
wirings shall be routed separately and secured to maintain electrical and physical separation
between Class 2 wiring and all other class wiring and limited energy circuit conductors from
unlimited energy circuit conductors.
When using Class 2 Device Wiring Only, you SHALL NOT Reclassify and Install as Class 1, 3 or
Power and Lighting Wiring.
When using molded connector power cables, DO NOT RELY ON WIRE COLORS FOR PIN-OUT;
Always use pin number references.
Wire connections shall be rated suitable for the wire size (lead and building wiring) utilized.
Distributed by Valin Corporation | www.valin.com | (800) 774-5630 | customerservice@valin.com
580 EtherCAT
valve systems with integrated fieldbus communications must only be connected to a
TD580ECTM1-3EN
Subject to change without notice
www.emerson.com
TM
Technical Manual
09/2021
1-3
Advertisement
Table of Contents
