Advertisement
[ QUICK START GUIDE ]
Getting started
Plug your Andrew+
1
into a power source.
Connect your computer, tablet or smartphone to Andrew+
3
A. Go to your Wi-Fi settings
and select the network named
xxxx.xxxxx is the Andrew+ device serial number
(you can find it on the door of the Optical Location Module, see "Product overview"
part)
If you do not have access to
!
a Wi-Fi compatible device,
please refer to our online help:
help.andrewalliance.com
B. The LED sign will stop blinking when it's successfully connected.
Launch a web browser, type
4
and follow the on-screen steps to continue installation.
Please take note that the
!
installation page might
open automatically.
Wait for the LED sign to turn blue
2
and blink
After a couple of minutes, Andrew+
will inform you when it is in
installation mode.
!
If Andrew+ doesn't automatically
enter into installation mode, press
the power button 5 times.
Andrew-718.xxxx.xxxxx
http://192.168.2.1
http://192.168.2.1
scan me
[ QUICK START GUIDE ]
Feel free to contact
our support team
Operations
Design your protocol
Our drag-and-drop editor makes it easy to
design a precise and complete protocol with all
that you need to run your
experiment perfectly.
Execute experiment with
Andrew+
Select the Andrew+ as an experiment setup
then prepare all the required materials.
You can monitor the automated
experiment in real time
Andrew+ will follow the experiment as
you've designed it, and will notify you if
and when it needs something.
Each step of the experiment will be
reported and available in OneLab.
Chat with our support team
Send us an email to
directly in OneLab
aa_support@waters.com
We reply within 1 business day
Advertisement
