Table of Contents
Advertisement
INSTALLATION OF CAR'S UPPER
ANCHORAGE POINT
IF THE CAR IS FITTED WITH CHILD RESTRAINT
UPPER ANCHORAGE POINT
Locate the upper anchorage point behind the rear seating
position. (Consult the car owners handbook for the location of the
upper anchorage point). The upper anchorage point should be
directly behind and central to the restraint. Remove thread plug
from the parcel shelf/floor/roof, etc. and install attachment bolt
and fitting as shown in Fig 1.
CAUTION: DO NOT OVERTIGHTEN ATTACHMENT BOLT.
OVERTIGHTENING MAY FRACTURE OR BREAK BOLT.
MAXIMUM TORQUE IS 20 Nm(14.75 ft.lb.)
Note: Minimum of five full turns of attachment bolt is required
before tightening force is applied.
IF THE CAR IS NOT FITTED WITH CHILD
RESTRAINT UPPER ANCHORAGE POINTS
For Sedans only - Drill 9mm diameter hole in the parcel shelf
on the centre line of the seating position as shown in Fig 3. Before
drilling the hole, check the underside for accessibility. Install the
attachment bolt as shown in Fig 2. It is recommended that this
installation be carried out by a child restraint fitting station or
licenced motor mechanic.
For vehicles other than Sedans - In Australia, consult
your nearest child restraint fitting station or traffic authority
for vehicle inspection to find the best, correct position for the
placement of the upper anchorage point, and for the correct
attachment bolt length and use of spacers. In New Zealand,
consult the agent for the vehicle. Note to Queensland purchasers:
The installation of anchorage points must be approved by
authorised officers appointed by Queensland Transport.
Authorised officers can be sourced from all Queensland Transport
Customer Service and Queensland Ambulance Service Centres.
90
Instructions for Installation & Use
UPPER ANCHORAGE FITTING
Fig.1.
Attachment Bolt
Lock washer
Anchor fitting
Spacer(s) if
required
Vehicle trim
Vehicle metal
structure
Front of Vehicle
UPPER ANCHORAGE
FITTINGS FOR SEDANS ONLY
Fig.2.
Attachment Bolt
Anchor fitting
Spacer(s) if
required
Vehicle trim
Vehicle metal
structure
Reinforcing
washer (cone
downwards).
Lock washer
Secure nut
Advertisement
Table of Contents
