Table of Contents
Advertisement
HOW TO INSTALL USING ISOFLEX™CONNECTORS
E. Engage the ISOFLEX™ connectors with each
ISOFIX low anchorage. A click may be heard
and a green indicator will show on the top of the
ISOFLEX™ connector when it has engaged.
Pull each strap to ensure both lower anchorage
connectors are engaged.
NOTE: Pull against the ISOFLEX™ connector to
verify that it is secure.
F. Push downwards on the side of the restraint to
compress it into the vehicle seat. Whilst pushing
down on the seat, pull on the adjuster strap to
remove all slack and tighten. Repeat for the
adjuster strap on the other side of the restraint.
G. The two tension indicators will show 'green'
indicating adequate tension has been applied.
H. Connect the top tether as described on page
35 to 38.
IMPORTANT:
Do not attach the lower attachment connectors
of two separate child restraints to the same
ISOFIX low anchorages in your car.
Always attach the top tether strap to the child
restraint upper anchorage in your car.
Child restraint lower attachment connectors and the
ISOFIX low anchorages in your car are designed to
withstand only those loads imposed by a correctly
fitted child restraint.
Push down on the seat
Pull ISOFLEX™ adjuster strap to tighten
Tension indicators
Instructions for Installation & Use
E
F
G
37
Advertisement
Table of Contents
