Installing Msata - Advantech FWA-3270A Startup Manual

Installation (Cont.)
e. Get the SATA cable from the accessory box. Refer to
the below figure to connect the SATA and power
cables to the HDD and arange them properly.

Installing mSATA

1. Take one mSATA (only supports half-size) and push it
into DIMM slot in the direction as shown in the below.
全长
半长
2. Take one Nylok screw from the accessory box and
insert it into the position marked with a red arrow to fix
mSATA onto the main board.
Installing M.2 SSD
1. Push the M.2 into the slot in the direction as shown in
the below.
6 FWA-3270 Startup Manual
Installation (Cont.)
2. Take one screw from the accessory box and insert it
into the maked position.
3. Fasten the screw onto the main board.
Installing NMC Card
1. Remove the blank plates in the direction as shown in
the below.