Advantech FWA-3270A Startup Manual page 5

Installation (Cont.)
b. Take eight shockproof washers from the accessory
box and place them onto the HDD bracket as shown
in the below.
c. Take eight screws from the accessory box and fix the
2.5" HDD onto the bracket as shown in the below.
d. Use the removed screws in the previous step to fix the
HDD bracket into the chssis.
e. Get two SATA cables from the accessory box. Refer
to the below figure to connect the SATA and power
cables to the HDD and arange them properly.
Installation (Cont.)
FWA-3270B:
a. Release the screws and remove the 2.5" HDD bracket.
b. Take eight shockproof washers from the accessory
box and place them onto the HDD bracket as
shown in the below.
c. Take eight screws from the accessory box and fix the
2.5" HDD onto the bracket as shown in the below.
d. Take eight screws from the accessory box and fix the
2.5" HDD onto the bracket as shown in the below.
FWA-3270 Startup Manual 5