Before You Start - Sun Microsystems Sun Fire B1600 Replacement Manual

Replacing DIMMs in the
Sun B200x Blade
This document provides the procedures for installing DIMMs in the Sun Fire B200x
blade, and contains the following sections:
"Before You Start" on page 1
"Replacing the DIMM" on page 2
"Installing the Blade" on page 8

Before You Start

Check that either the blue 'Ready to Remove', or amber 'service required' LED is lit
on the blade you want to remove from the system chassis.
Note – Do not remove the blade until one of these LED states is displayed.
See the Sun Fire B1600 Blade System Chassis Administration Guide for details of how to
shut down the blade safely.
Caution – Operating the system chassis with empty blade slots might disrupt
airflow through the system chassis and will compromise EMC compliance.
1