Start Messages
Once loaded, the External Interrupt and Clock Cable Diagnostic displays its start
message on the operator's console in the following format:
Extended XINT Diagnostic
Diagnostic Revision: y.y
[Copyright year Sun Microsystems, Inc.]
Variable
y.y
year
The diagnostic then displays the Interactive Mode Options Menu.
Milestone Messages
As each test starts execution, the diagnostic displays a test milestone message:
Running Test tt: testname
Variable
tt
testname
If you enabled milestones messages during program initialization, the program also
displays the following milestone messages during program execution:
As each external interrupt is tested, the program displays:
XIACKx is connected to XIRQx
4-2
Sun StorEdge A7000 External Interrupt and Clock Cable Diagnostic Reference Manual • October 1998
Description
Specifies the current revision of the diagnostic.
Specifies the year the program was copyrighted.
Description
Specifies the test number.
Specifies the name of the test.