Scope Of Delivery; Proper Use; Safety Information - Scheppach DECO XLST Translation Of Original Instruction Manual

3. Scope of delivery

• Scroll saw
• Carrying handle (20)
• Saw blade (25)
• Allen key, 2.5 mm (A)
• Allen key, 4 mm (B)
• M5x10 mm Phillips screw (C)
• M8x30 mm hexagonal bolt (D)
• Washer (E)
• Spring washer (F)
• Hexagonal nut M8 (G)
• Foot (H)
• Longitudinal member, top (I)
• Longitudinal member, bottom (J)
• Cross member, top (K)
• Cross member, bottom (L)
• Rubber foot (M)
• Flat round screw with square head
M6x10 mm (N)
• Hexagonal nut M6 (O)
• Spring washer (P)
• Washer (Q)
• M5x8 mm Phillips screw (R)
Assembly material:
(Not included in the scope of delivery)
• 90° engineers square
• Phillips head screwdriver
• 10 mm open-ended spanner
• 13 mm open-ended spanner
• 14 mm open-ended spanner

4. Proper use

The scroll saw is used for cutting angular timbers or
other materials such as Plexiglas, GRP, foam, rubber,
leather and cork. Never use the saw to cut round mate-
rial. Round material can tilt easily.
Risk of injury! Parts may be ejected!
The device may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
28 | GB
• Only suitable saw blades may be used for the ma-
chine.
1x • An element of the intended use is also the obser-
1x vance of the safety instructions, as well as the as-
1x sembly instructions and operating information in the
1x operating manual.
1x • Persons who operate and maintain the machine
8x must be familiar with the manual and must be in-
4x formed about potential dangers.
8x • In addition, the applicable accident prevention regu-
4x lations must be strictly observed.
4x • Other general occupational health and safety-relat-
4x ed rules and regulations must be observed.
2x • The liability of the manufacturer and resulting dam-
2x ages are excluded in the event of modifications of
2x the machine.
2x
4x Residual risks
Even when this power tool is operated properly,
24x residual risks still remain. The following hazards
may arise in connection with the design and con-
24x
24x struction of this power tool:
24x • Lung damage if suitable dust protection mask is not
4x worn.
• Hearing damage if suitable hearing protection is not
worn.
• Risk of accident due to contact with the hands in the
uncovered cutting area of the tool.
• Danger of injury during a tool change (cutting haz-
ard).
• Crushing of fingers.
• Danger due to kick-back.
• Tilting of the workpiece due to insufficient workpiece
support surface.
• Touching the cutting tool.
• Ejection of branches and workpiece parts.

5. Safety information

5.1 General power tool safety warnings
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or se-
rious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
www.scheppach.com