Introduction; Device Description - Scheppach DECO XLST Translation Of Original Instruction Manual

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Star grip screw
2. Connection point (blow-off device)
3. Saw blade guard
4. Holder (saw blade guard)
5. Depressor
6. Saw table
7. Foot pedal
8. Connecting tube (extraction)
9. Cover
10. Bearing points
11. Clamping screw (saw blade tension)
12. LED lamp
13. On/off switch
14. Speed regulator
15. Operating mode selection switch
16. Clamping screw for angling the saw table
17. Scale
18. Screw (depressor)
19. ON/OFF switch (LED lamp)
20. Carrying handle
21. Clamping screw (blow-off nozzle)
22. Table inlay
23. Assembly points (table frame)
24. Screw-on point (saw blade guard)
25. Saw blade
26. Phillips screw (cover)
27. Bottom saw blade holder
28. Saw blade clamping screw
29. Top saw blade holder
30. Saw blade clamping screw
31. Pointer
32. Graduated scale screw
33. Machine housing
34. Phillips screw (carrying handle)
35. Arm
www.scheppach.com GB | 27