Appendices; Setting Serial Port To Enable Vcp On Windows Pc - Titan PULSITE LINK Instruction Manual

9 Appendices

9.1 Setting serial port to enable VCP on Windows PC

Open Control Panel Devices and Printers on your PC:
Plug in the ASCII Streaming device
and identify the New Device
Highlight and Right Mouse Click to Access Properties
In Advanced Tab enable VCP
Disconnect and Re-Connect the USB to the ASCII Streaming Device
Find and Open Device Properties and
look to Hardware to Identify the COM
Port Value. e.g. COM8
If required, Test the Streaming using the included program ASCII_Test_Pulsite_Link.exe
© Titan Enterprises Ltd 2023
®
www.flowmeters.co.uk
Pulsite®Link_Instruction_Manual_0823
32