®
10
NOTE:
Best practice is to place Pull up/ Pull down Resistor near target device
3.1.2 USB Connection
The housing of the Pulsite
®
Link has an M20 screw thread gland cover situated at the USB
connection position. This allows access to the USB connection in order to change settings or
datalog the Pulsite
information, without the need to uninstall the unit.
®
When using this port, care should be taken to ensure there is no chance of water ingress to
the housing.
USB access via the M20 cover situated between the cable glands
Pulsite®Link_Instruction_Manual_0823
© Titan Enterprises Ltd 2023
www.flowmeters.co.uk