Flow Details Tab - Titan PULSITE LINK Instruction Manual

5.5 Flow Details Tab

The Flow Details tab displays the performance of the meter in real time.
The Results Details window below the rate and total display, shows various relevant
operational parameters whilst the unit is operating, e.g. relay status and frequency output if
these options are selected.
Parameters:
•
Flow: This is the instantaneous flow rate and is updated approximately every 100
milliseconds.
•
Input: The measured frequency of pulses from the connected flowmeter/device.
•
NPN Output & PNP Output: If no selection is made, "Not used" will be in the Description
column. See following text and chart for the display legends.
o OR: When NPN or PNP is set to "Output" and set to "Pulse" this will display the
frequency of the running output and the number of pulses per litre selected.
o OR: If set to "Output" and set to "Flow switch" the Value column will show the
transistor status either "low" or "high" and the notes will show the selected
switch points.
•
Analog: Displays the chosen analog output and value.
The chart below shows the various display messages for the operating functions. During
operation only one message will be shown for each parameter.
© Titan Enterprises Ltd 2023
®
www.flowmeters.co.uk
Pulsite®Link_Instruction_Manual_0823
24