Once stored, the software message bar will display "Settings match meter non-volatile
memory":
5.1.4 Test Outputs
This tab enables the user to manually set
outputs on the outputs for testing to the
target device.
Once the required output is selected,
click the "Start Test" button and all PINs
will give the selected output rate for 32
seconds.
5.1.5 Software Information
This displays the current software version
of the Interface Software and the flow
meter or instrument connected.
© Titan Enterprises Ltd 2023
®
www.flowmeters.co.uk
Pulsite®Link_Instruction_Manual_0823
15