®
12
5 Interface Setup
5.1 Connecting Meter to PC
Before use, download and install the Titan Interface Software from memory stick or the
Website.
The Pulsite
Link should be set up using the USB interface and a suitable windows-based
®
computer.
Below is a screen shot of the opening Software screen:
NOTE: When correctly connected the bars will rotate in the bottom left hand corner
and you should see "All Controls enabled"
On connecting the Pulsite
Link, after 5-10 seconds,the Software will normally
®
automatically load the settings saved in the non-volatile memory of the connected
meter. The user can use the spy-glass icon to automatically pull the meter's saved
settings at any time.
This software allows the user to configure all options of the meter. Detailed descriptions follow,
but if the user hovers the mouse over a menu item, a brief description will be displayed to help.
Pulsite®Link_Instruction_Manual_0823
© Titan Enterprises Ltd 2023
www.flowmeters.co.uk