Opera NIVEL PRO User Manual page 62

EN
Interference with and repairs to the appliance by unqualified persons are dangerous as they can result in
an electric shock or a short circuit. Do not interfere with or try to repair the appliance; this could cause
injury to persons and damage to the appliance. Always have such work done by an expert, e.g. a
Customer Service technician.
If your appliance is faulty, please check whether you can rectify the problem yourself by consulting
these instructions for use.
The fuses blow regularly?
Contact a technical customer service or an electrician!
Does the hob have tears or cracks?
There is a risk of electric shocks if the glass ceramic hob develops fractures, cracks, tears or damage of
any other kind. Immediately switch off the appliance. Disconnect the fuse immediately and call Customer
Service.
You can't switch your induction hob on?
• Has the wiring system (fuse box) in the house blown afuse?
• Has the hob been connected to the mains?
• Is the childproof lock activated, i.e. does the display show an "L"?
• Are the sensor keys partly covered by a damp cloth, fluid or a metallic object? Please rectify.
• Are you using unsuitable cookware? See the section on cookware for induction hobs
The hob or a cooking zone has suddenly switched off
• Did you accidentally press the ON/OFF key?
• Are the sensor keys partly covered by a damp cloth, fluid or a metallic object? A buzzer will sound briefly.
After a few seconds the appliance will switch off. Please remove the item located in front of the sensor
keys.
• Has the safety cut-off device been activated, i.e. was a power level operated unchanged beyond a
specific period of time? See the section on operation time limit.
The pot sign appears?
A cooking zone has been switched on and the hob is expecting a suitable pot or pan to be placed on the
cooking zone
REGULATIONS FOR
be supplied.
The pot sign
endangered components
The cookware is unsuitable for induction cooking or the pot or pan is too small.
or component pins. Only qualified staff
LED display for cooking settings and residual heat display H does not come on or only partially
Display defective. Call Customer Service. Risk of burning, as the temperature warning is not guaranteed.
The symbol or ER03 will blink and a time-limited continuous signal will sound.
Food which has boiled over, cookware or other items are causing the touch control sensor keys to be
continuously operated. Remedy: clean the surface or remove the item. To delete the symbol press the
same key or switch the hob off and on.
Error code E2 is indicated?
The electronic unit is too hot. Check the installation of the hob. Make sure that there is sufficient ventila-
tion. See the section on "Protection against overheating"
Do not heat-up empty pots and use appropriate cookware.
62
(pan recognition). Only when a pot has been placed on the cooking zone the power will
HANDLING
SENSITIVE
still appears, even though a pot or pan was placed on the hob?
and
TROUBLESHOOTING
WARNING OF ELECTRICAL ENERGY!
RISK OF FATAL INJURY!
Live components have been installed near this
symbol. Covers bearing this sign may only be
removed by a certified skilled electrician.
CAUTION! HOT SURFACES!
This symbol has been applied to surfaces which get
hot. There is a risk of serious burning or scalding.
The surfaces may also be hot after the appliance has
been switched off.
OBSERVE REGULATIONS
ELECTROSTATICALLY
COMPONENTS AND MODULES (ESDS)
Electrostatically
modules are located behind covers bearing the
adjacent symbol. Never touch plug connections, strip
conductors or component pins. Only qualified staff
members who are familiar with ESDs are authorised
to carry out any technical intervention work.
FOR HANDLING
SENSITIVE
endangered components and