Opera NIVEL PRO User Manual page 53

conductors or component pins. Only qualified staff conductors or component pins. Only qualified staff
members who are familiar with ESDs are authorised members who are familiar with ESDs are authorised
to carry out any technical intervention work. to carry out any technical intervention work.
4.12 Pause
The execution of the function is possible only if at least one cooking zone is on. In pause mode, the
cooking process is suspended and the hob does not deliver power.
Activation
• Press the Pause button for at least 1 second, the corresponding LED turns on above the key and all
displays show II.
1
• While the Pause function is active
• Any Timer (also Alarm Timer) set before the pause will be stopped during the pause and continue
when pause mode is quitted.
• Cooking zones are turned off.
• A selected booster or heat up time automatic function is terminated.
• Residual heat calculation and maximum operation time limitations will not be interrupted and keep on
working in the background.
• Functional LED's such as Timer, multi-zone, keep on glowing according to their status.
The pause mode can only be active for maximum 10 min.
Throughout the pause time, the ON/OFF button can be used to switch the control off. In this case the
pause mode is also deactivated.
Deactivation
• Press the Pause button, the LEDs light up above the cursor of one of cooking zones.
• Within 10 seconds press and scroll from the left to the right on the slider cursor of the illuminated
area. The LED above the pause key turns off and the condition before the pause mode is restored.
4.13 Recall
If the control was accidentally switched off through the main the ON/OFF button all settings can be
restored using the recall function.
After switching the control off from the main switch the user has 6 seconds to switch the control on again
and then another 6 seconds to press the Pause button in order to recall the settings.
The recall function can only be used if at least one cooking zone was active
(cooking level >0) independent from key lock.
4.14 Remaining heat indicator
Appliances also features remaining heat indicator H. Hotplates are not heated directly, but through return
heat radiating from the dish. As long as H is on after the hotplate was switched off, the remaining heat may
be used for warming up food or for melting.
Even when H disappears, the hotplate may still be hot.
4.15 Fast cooking
Extra powerful setting may be additionally switched on for fast cooking. This extra power is used for
heating large quantities of food.
After switching on, the extra power is activated for 5 minutes then automatically switches back on to the
maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited.
This is indicated on the power display by intermittently flashing the selected
cooking level and limited power for a few seconds.
Activation
• Select the desired cooking zones and move the slider control to the extreme rights to activate the
extra power P.
• The extra power is active.
• The display shows P.
OPERATION 1 EN
4.16 Power ma
system
4.17 Heat-up tim
4.18 Bridge
53