EN
Appliance description
Observe all safety and warning information during operation (see Safety chapter).
3.1 System description
3
Appliance description
Observe all safety and warning information during operation (see Safety chapter).
REGULATIONS
FOR
3.1
System description
endangered
components
9
7
Installation sequence: 14 and 15 inside 13, then 13 - 11 - 12 inside 3
1. Nivel Professional cooking hob
1. Nivel Professional cooking hob
2. Touch control panel
2. Touch control panel
3. Drawer with LED lighting and light sensor
3. Drawer with LED lighting and light sensor
4. Naber canal (fitting length)
4. Naber canal (fitting length)
5. Fan motor (B/C version)
5. Fan motor B/C version
6. Outlet nozzle in air direction
7. Nozzle plate for change of blowing direction
6. Outlet nozzle in air direction
8. Suction silencer
7. Nozzle plate for change of blowing direction
8. Suction silencer
9. Outlet silencer
10. Fan-cooking hob connection cable
11. Water collector
12. Condensation filter
13. Filters box
REGULATIONS
FOR
14. Grease filter
15. Activated carbon filter (C version only)
endangered
components
46
APPLIANCE DESCRIPTION
APPLIANCE DESCRIPTION
GENERAL
HANDLING
SENSITIVE
1
and
2
3
4
8
5
9
Installation sequence:
HANDLING
SENSITIVE
and
14
13
12
10
11
Airflow
6
14 and 15 inside 13, then 13 - 11 - 12 inside 3
9. Outlet silencer
10. Fan-cooking hob connection cable
11. Water collector
12. Condensation filter
13. Filters box
14. Grease filter
15. Activated carbon filter (C version only)
WARNING OF ELECTRICAL ENERGY!
RISK OF FATAL INJURY!
Live components have been installed near this
symbol. Covers bearing this sign may only be
removed by a certified skilled electrician.
CAUTION! HOT SURFACES!
This symbol has been applied to surfaces which get
hot. There is a risk of serious burning or scalding.
The surfaces may also be hot after the appliance has
been switched off.
OBSERVE
REGULATIONS
ELECTROSTATICALLY
COMPONENTS AND MODULES (ESDS)
4
15
3
FOR
HANDLING
SENSITIVE
EN
Need help?
Do you have a question about the NIVEL PRO and is the answer not in the manual?