Opera NIVEL PRO User Manual page 51

TABLE OF CONTENTS
4.2 Power regulation
Heating power of the hotplates may be set at ten different levels.
The chart indicates illustrative use of each power setting.
Power setting
0
1-2
3
4-5
COOKING ZONES
6
220 x 184 mm
7-8
(SINGLE)
TABLE OF CONTENTS
220 x 184 mm 9
EN
(BRIDGE)
A
P
4.2 Power regulation
U
COOKING ZONES Ø MIN. PAN BOTTOM
4.3 Energy saving tips
220 x 184 mm
Ø 145 mm
(SINGLE)
• When buying pots, be careful in selecting size: pot diameter usually refers to the top edge of the pot,
220 x 184 mm
Ø 245 mm
(BRIDGE)
which is often larger than the bottom;
• Steam-pressure pots, which use pressure in tightly sealed interior, are especially economic, and
save both time and energy. Shorter cooking time leaves more vitamins in food;
• Always leave enough water in steam-pressure pots, otherwise it may result in overheating which may
damage both the pot and the appliance;
• Always cover pots with lids of appropriate size;
4.3 Energy saving tips
• Use such pot size to accommodate the quantity of food to be prepared.
4.4 Hob Control
• After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for
operation.
• The hob is fitted with electronic sensors which are switched on if you touch the relevant circle for at
4.4 Hob Control
least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization).
• Always keep the sensor surface clean.
4.5 Slide Control
4.5 Slide Control
8
4.6 Turn the hob on
• 4.6 Turn the hob on Press the ON/OFF button for at least one second.
• The hob is now active, and all cooking zone displays indicate .
8
• Now you need to select the next setting within 10 seconds, otherwise the hob switches off.
GENERAL
Purpose
Off, using remaing heat
Maintaining warm food, slow simmer of smaller quanities
Slow simmer (continuation of cooking after a powerful start-up)
Slow cooking (continuation of larger quantites, roasting larger chunks)
Ø MIN. PAN BOTTOM
Roasting, Browning
Ø 145 mm
Roasting
EN
Start of cooking, roasting
OPERATION
Ø 245 mm
Automatic heat up
Especially powerful setting for extremely large quantities of food
Heating power of the hotplates may be set at ten different levels.
Melting 42°C
The chart indicates illustrative use of each power setting.
Power
Purpose
setting
0 Off, using remaing heat
1-2
Maintaining warm food, slow simmer of smaller quanities
3 Slow simmer (continuation of cooking after a powerful start-up)
4-5
Slow cooking (continuation of larger quantites, roasting larger chunks)
6 Roasting, Browning
7-8 Roasting
9 Start of cooking, roasting
A Automatic heat up
P Especially powerful setting for extremely large quantities of food
Melting 42°C
Keeping warm 70°C
. If you place the dish over
Cooking 94°C
When buying pots, be careful in selecting size: pot diameter usually refers to the
top edge of the pot, which is often larger than the bottom;
Steam-pressure pots, which use pressure in tightly sealed interior, are especially
economic, and save both time and energy. Shorter cooking time leaves more
. If you place the dish over
vitamins in food;
Always leave enough water in steam-pressure pots, otherwise it may result in
overheating which may damage both the pot and the appliance;
Always cover pots with lids of appropriate size;
Use such pot size to accommodate the quantity of food to be prepared.
After turning the ceramic glass hob on all displays come on for a moment. The
hob is ready for operation.
1
The hob is fitted with electronic sensors which are switched on if you touch the
relevant circle for at least one second.
Each sensor activation is followed by a sound signal.
Avoid placing any objects on sensor surface (possible error signalization
Always keep the sensor surface clean.
EN
Press for at least one second.
The hob is now active, and all cooking zone displays indicate
1 General
Now you need to select the next setting within 10 seconds, otherwise the
hob switches off.
1.1 For your information...
9
Please read this manual carefully before using your appliance. It contains import
EN
OPERATION
WARNING OF ELECTRICAL ENERGY!
RISK OF FATAL INJURY!
Live components have been installed near this
symbol. Covers bearing this sign may only be
removed by a certified skilled electrician.
CAUTION! HOT SURFACES!
This symbol has been applied to surfaces which get
hot. There is a risk of serious burning or scalding.
The surfaces may also be hot after the appliance has
been switched off.
OBSERVE REGULATIONS
ELECTROSTATICALLY
COMPONENTS AND MODULES (ESDS)
Electrostatically
modules are located behind covers bearing the
adjacent symbol. Never touch plug connections, strip
conductors or component pins. Only qualified staff
members who are familiar with ESDs are authorised
to carry out any technical intervention work.
0
Medium power
WARNING OF ELECTRICAL ENERGY!
RISK OF FATAL INJURY!
Live components have been installed near this
symbol. Covers bearing this sign may only be
Full power
removed by a certified skilled electrician.
CAUTION! HOT SURFACES!
This symbol has been applied to surfaces which get
hot. There is a risk of serious burning or scalding.
The surfaces may also be hot after the appliance has
been switched off.
OBSERVE REGULATIONS
ELECTROSTATICALLY
COMPONENTS AND MODULES (ESDS)
Electrostatically
modules are located behind covers bearing the
adjacent symbol. Never touch plug connections, strip
FOR HANDLING
SENSITIVE
endangered components
).
GENERAL
.
FOR HANDLING
SENSITIVE
endangered components
EN
and
51
and
EN