Mini Ir Speed Dome In-Ceiling Mounting - HIKVISION AP530HT Quick Start Manual

6. Rotate the bolts again. The toggle will automatically rotate down to secure the dome to the
ceiling.
7. Secure the lower dome to the back box with three screws as shown in Figure 2-17.
8. Route the cables through the ceiling for the speed dome. Please refer to the section 1.1
Connecting the Cables to connect the cables.

2.3.2 Mini IR Speed Dome In-ceiling Mounting

Before you start:
The in-ceiling mounting is applicable to the indoor ceiling construction. The followings are the
mandatory precondition for mounting:
 The height of the space above the ceiling must be more than 250mm.
 The ceiling must be with the thickness between 5 and 40mm.
 The ceiling must be strong enough to withstand more than 4 times the weight of the dome and
its accessories.
Steps:
1. Set the address, baudrate and protocol. For the detailed DIP switch settings, please refer to
Section 1.2.4 Mini Speed Dome Settings.
2. Drill holes in the ceiling.
1) Attach the drill template to the ceiling where you need to install the speed dome.
2) Cut a hole and drill screw holes according to the drill template.
±
2mm of the diameter of the circle is tolerable.
HD-TVI Speed Dome·Quick Start Guide
Figure 2-16 Install the Dome to the Ceiling
Figure 2-17 Install the Lower Dome
20
Ceiling
Toggle
Screws