Table of Contents
Advertisement
2. Move the cursor to the PARK TIME, and set the value in the range from 5 to 720 seconds.
3. Move the cursor to the PARK ACT, and the action can be set as preset 1-8, pattern 1-5, patrol
1-10, pan scan, tilt scan, random scan, frame scan, panoramic scan, day mode, night mode,
patrol-d or none.
If no control signal is received after the park time under the following circumstances, no park
actions will be performed: in the process of performing dome actions by calling special presets.
HD-TVI Speed Dome·Quick Start Guide
MOTION
AUTO FLIP
PROPORTIONAL PAN
PARK TIME
PARK ACT
SCAN SPEED
IMAGE FREEZE
DOME SPEED
BACK
Figure 3-8 PTZ Configuration
30
ON
ON
5
NONE
28
OFF
6
EXIT
Advertisement
Table of Contents
