7-Inch Ir Speed Dome Settings - HIKVISION AP530HT Quick Start Manual

Protocol List
For convenient settings, refer to the following list to set the protocol for the speed dome.
Protocol
Self-adaptive
Pelco_D
Pelco_P
AD Manchester
The speed dome is self-adaptive to private protocol when the No.8 and 9 switches are both
OFF.

1.2.3 7-inch IR Speed Dome Settings

Two DIP switches SW1 and SW2 are for setting the speed dome address, baudrate, protocol, etc.,
with value ON=1 and OFF=0. The switch label is on the back of the SWITCH cover as shown in Figure
1-8.
Each number of the switch represents a DIP value, ranging from 1 to 8 for the lowest to highest.
HD-TVI Speed Dome·Quick Start Guide
Switch
Baudrate
4800
9600
19200
Table 1-8 Protocol
Figure 1-8 Label of DIP Switch for IR Speed Dome
7
6 7
ON OFF
OFF ON
ON ON
8
OFF
OFF
ON
ON
SW1 SW2
9
OFF
ON
OFF
ON