Mini Speed Dome In-Ceiling Mounting Applications - HIKVISION DS-2AE7232TI-A Quick Start Manual

2.3 Mini Speed Dome In-ceiling Mounting Applications

Before you start:
The in-ceiling mounting is applicable to the indoor ceiling construction. The followings are the
mandatory precondition for mounting:
 The height of the space above the ceiling must be more than 250mm.
 The ceiling must be with the thickness between 5 and 40mm.
 The ceiling must be strong enough to withstand more than 4 times the weight of the dome and
its accessories.
Steps:
1. Drill holes in the ceiling.
(1) Attach the drill template to the ceiling where you need to install the speed dome.
(2) Cut a hole and drill screw holes according to the drill template.
±
2mm of the diameter of the circle is tolerable.
2. Disassemble the speed dome.
(1) Loosen three screws as shown in the following figure.
(2) Remove the lower dome.
(3) Loosen three screws and remove the back box.
(4) Remove the protective lens cover, foam and sticker from the dome drive.
Back Box
3. Install the toggle bolts.
(1) Remove the toggle from the toggle bolt.
(2) Insert the bolts into the screw holes on the dome.
HD-TVI Speed Dome·Quick Start Guide
Figure 2-13 Drill Holes
Figure 2-14 Disassemble the Speed Dome
20
Ф129
Ф11
Sticker
Protective Foam
Notch
Lower Dome