HIKVISION AP530HT Quick Start Manual page 27

3. Route the cables through the ceiling for the speed dome. Please refer to the section 1.1
Connecting the Cables for connecting the cables.
4. Install the toggle bolts.
1) Remove the toggle from the toggle bolt.
2) Insert the bolts into the 3 screw holes on the dome.
3) Rotate the bolts through the 3 screw holes.
4) Reinstall the toggles as shown in Figure 2-19.
5. Align the toggle bolts with the screw holes on the ceiling.
6. Push the dome to the mounting hole on the ceiling.
HD-TVI Speed Dome·Quick Start Guide
Figure 2-18 Drill Template
Toggle
Bolt
Figure 2-19 Install Toggle Bolts
Figure 2-20 Push to the Mounting Hole
21