HIKVISION AP530HT Quick Start Manual page 29

2) Drill screw holes and a cable hole (optional) according to the drill template.
2. Disassemble the speed dome.
1) Loosen three screws on the notch.
2) Remove the lower dome.
3) Remove the protective lens cover, foam and sticker from the dome drive as shown in
Figure 2-24.
Lens Cover
3. Attach lower dome to the back box, and secure it with screws.
4. Align the ceiling mount with the screw holes on the drill template. Secure the ceiling mount to
the ceiling with screws (supplied).
5. Align the hook of the ceiling with unlock label on the speed dome.
6. Push the speed dome to the ceiling mount and rotate clockwise to secure it.
HD-TVI Speed Dome·Quick Start Guide
Figure 2-23 Drill Template
Sticker
Figure 2-24 Disassemble the Speed Dome
Figure 2-25 Install Ceiling Mount
23
Protective Foam
Notch
Lower Dome
Ceiling