The Components Of The Air Handling Units; Disposal - Salda AMBERAIR COMPACT S-CX H Operation, Installation & Maintenance Instructions

9.2. THE COMPONENTS OF THE AIR HANDLING UNITS

All the individual components are specified below in a simplified and diagrammatical description.
Fig. 9.2.1 AmberAir Compact S-CX V
1 - Plate heat exchanger; 2 - Exhaust fan; 3 - Supply fan; 4 - By-pass damper; 5 - Electrical/water coil;

9.3. DISPOSAL

Old unit still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials may be recovered
and used again.
The danger of injury from sharp edges, sharp corners and thin sheet metal parts!
Separate the components for recycling into the following categories:
• Steel
• Aluminium
• Plastics
• Insulating materials
• Cables and wires
• Electronic scrap, e.g., circuit boards
AMBERAIR COMPACT S-CX v2023.3
6 - Control board; 7 - Supply air filter; 8 - Extract air filters; 9 - Pressure switch.
Fig. 9.3.1 AmberAir Compact S-CX V
Fig. 9.2.2 AmberAir Compact S-CX H
EN | 55