General Part; Range Of Application; Product Information; Symbols And Marking - Salda AMBERAIR COMPACT S-CX H Operation, Installation & Maintenance Instructions

3. GENERAL PART

3.1. RANGE OF APPLICATION

Not suitable for operation in pools, saunas and other similar premises.
The AmberAir Compact S units are designed for general ventilation applications such as offices, educational buildings, public buildings, shops, etc.
Units with side duct connection can be installed outdoors if covered from the precipitation. If ducted accessories are mounted outdoors, they must
be insulated.
AmberAir Compact S is designed to operate in surrounding and inlet air temperatures from -23°C to +40°C.

3.2. PRODUCT INFORMATION

This manual includes the information required for installing and maintaining the heat recovery unit type AmberAir Compact S manufactured by
SALDA UAB. The units include the following model options:
AmberAir Compact S-CX-1500-H-E-R-C1

3.3. SYMBOLS AND MARKING

Warning – pay attention
Apply the technical label on the unit (in an easily accessible location) or on the dashed location of the technical manual to keep the important
information about the unit.
1 - Logo; 2 - Product code (SKU); 3 - Product name; 4 - Technical data; 5 - Serial number; 6 - Production place.
Fig. 3.3.3 Technical label place and air duct indication AmberAir
Compact S-CX H (left version)
AMBERAIR COMPACT S-CX v2023.3
C1 - Control options are CAV (C1)
R/L - Supply air outlet on the right (R) or left (L)
E/W/CO - Heater options are electrical (E), water (W), combined heating/cooling coil
(CO) or empty (none)
H/V - Horizontal (H) or vertical (V) duct connection
1000/1500 - unit size
CX - counterflow
AmberAir Compact S - Range name
Fig. 3.3.1 Technical label
Fig. 3.3.2 Indication for duct connection.
ODA - outdoor air; SUP - supply air; ETA - extract air; EHA - exhaust air.
Additional information
Fig. 3.3.4 Technical label place and air duct indication AmberAir
Compact S-CX H (right version)
EN | 5