Connect Compressed Air Supply - GE AKTA ready XL Operating Instructions Manual

4.3.3
Introduction

Connect compressed air supply

ÄKTA ready XL Operating Instructions 29281616 AE
TeDIS Valid on Date Printed
Connect compressed air supply
This section describes how to connect the compressed air supply.
For requirements on air supply, refer to
Section 9.1 Specifications, on page
Step Action
1
Connect compressed air to the air supply connection on the electrical cabi-
net.
2 Make sure that the air supply pressure is between 6.5 to 10 bar g. The regu-
lator is set to 6.5 bar g at the factory and shall not be changed.
4.3.3 Connect compressed air supply
Section 4.1 Site requirements, on page 77
150.
Printed on: 15-09-2023 11:27:35 ***
4 Installation
4.3 Setup
and
91