Updating Firmware - Foxtech SYK-10L AI User Manual

Updating Firmware

1. Connect the gimbal and the GCU with the gimbal control cable. Connect
the computer and the gimbal update port with the config module. Power
on the devices.
2. Open GimbalConfig software. Choose the COM port corresponding to the
config module. Click "Open Port" and confirm the software and the gimbal
are connected.
3. Click "Open Firmware" , choose the firmware file, click "Start Upgrade" and
wait for the updating complete.
SYK-10L AI User Manual
2023 FOXTECH All Rights Reserved 6