Foxtech SYK-10L AI User Manual page 10

SYK-10L AI User Manual
IP Address / Gateway
Camera IP Address / Camera Gateway.
Udp target / Udp port
Should be configured while the stream is in UDP mode.
Stream Bitrate
Image transfer rate, which is in the unit of bps. The higher the stream
bitrate, the clearer the transferred image, yet the higher request to the
bandwidth of the image transmission system.The recommended
range is [2048~8192].
Output Resolution / Output FPS
Default as 1080P / 25FPS
Stream Mode
Stream Media / UDP / GB/T28181. Default as Stream Media. The
Stream Media is RTSP mode; it is necessary to configure the UDP
target and UDP port in UDP mode; the GB/T28181 mode is unavailable
temporarily.
Encode Format
H.264 / H.265. Default as H.264.
Save Format
Default as MP4.
Save Stream Bitrate
Image storage rate, which is in the unit of bps. The higher the storage
bitrate, the clearer the storage image, yet the higher request to
the storage rate of the MicroSD card.The recommended range is
[2048~9216].
2023 FOXTECH All Rights Reserved 5