Table of Contents
Advertisement
User Manual
Updating Firmware
1.
Connect the gimbal and the GCU with the gimbal control cable. Connect
the computer and the gimbal update port with the config module. Power
on the devices.
2.
Open GimbalConfig software. Choose the COM port corresponding to the
config module. Click "Open Port" and confirm the software and the gimbal
are connected.
3. Click "Open Firmware" , choose the firmware file, click "Start Upgrade" and
wait for the updating complete.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the SYK-10 and is the answer not in the manual?
Questions and answers