Service Manual
PCOR
Optional PCOR Housing Repair
Series 51 Electrohydraulic Proportional Controls Service Manual
Disassembly
1. Remove plugs (N27). Remove and discard O-rings (N27A).
2. Using a 1 inch hex wrench, remove plug (N23). Remove and discard O-ring (N23A).
3. Remove locknut (N14).
4. Remove adjustment plug (Z00). Remove and discard O-ring (N16J).
5. Remove spring (N18).
6. Remove spool and spring guide assembly (N20).
7. Remove screws (N29).
8. Remove and discard O-rings (N24P, N82).
9. If present, remove orifices (U6, U7).
PCOR
U7
U6
N27
N23
Legend
Item
N27
N23
U6, U7
N29
N14
Inspection
Clean and inspect components for damage or foreign material. Replace damaged parts.
Assembly
1. If previously removed, Use a 3mm internal hex wrench to install orifices (U6, U7). Torque to 6 N•m [4
lbf•ft].
2. Using petroleum jelly to retain them, install new interface O-rings (N24P, N82).
11009448 • Rev BA • July 2014
N82
N20
N24P
N8 7
N27
Wrench size
1/8 inch internal hex
1 inch
3 mm internal hex
5 mm internal hex
1-5/16 inch
N16J
Z00
N18
N29
P106 384E
Torque
7 Nm [4 lbf•ft]
40 Nm [30 lbf•ft]
6 Nm [4 lbf•ft]
16 Nm [12 lbf•ft]
N/A
N14
15