Basic Transmission Method; When Using The Adf - Konica Minolta bizhub 266 User Manual

7.1

Basic transmission method

7 How to Use Scan to Mobile
This chapter describes how to transmit scanned data.
7.1 Basic transmission method
This section describes the basic transmission method.
Tips
To run Scan to Mobile, [ENABLE] has to be selected in [MOBILE SCAN].
d
Reference
For details on setting mobile scan, refer to page 7-9
7.1.1

When using the ADF

1
On the screen of the Mobile (for iPhone/iPad/Android) in Android/iOS devices, set the WebDAV func-
tion to ON.
2
Press the Scan key.
The machine switches to the scan mode.
3
Load the original onto the ADF.
% The maximum number of originals that can be placed at one time into the ADF is 70. Do not set orig-
inals above the
% For details on how to set the original, refer to [User's Guide Copy].
% For details on how to set a double-sided original, refer to page 7-5.
4
Press the ,key.
The mobile setting screen appears.
5
Use the +/, key to select [IP ADDRESS], then press OK key.
6
Enter the IP address of the destination.
7
Press the OK key.
The screen returns to the mobile setting screen.
8
Use the +/, key to select [PORT NO.], then press OK key.
9
Enter the port number.
bizhub 306/266
mark.
7
7-3