10
10.2
Error of network scan
Message
[COMMUNICATION ERROR]
[XXXX Server]
[CANNOT CONNECT]
[XXXX Server]
[CANNOT GET IP]
[XXXX Server]
[DISCONNECT]
[XXXX Server]
[WRONG PASSWORD]
[XXXX Server]
[MEMORY FULL]
[MEMORY FILE FULL]
[SERVER MEMORY FULL]
[SMTP Server]
[XXX SERVER ERROR]
10-4
Cause
Communication with the server
failed due to a problem in the
machine or the unavailability of
the network or server.
A connection with the server
could not be established.
An IP address could not be ob-
tained from the DNS server.
The connection with the server
has been severed.
Login to the server failed due to
use of an incorrect password.
Image data has caused a memo-
ry overflow during E-mail trans-
mission.
The maximum number of files
has been used during E-mail
transmission.
A memory overflow occurred in
the SMTP server during E-mail
transmission.
Scanned data could not be cor-
rectly uploaded to the FTP serv-
er, SMB server, or Mobile server.
Error of network scan
Correction action
Check the communication result
report.
Contact your network adminis-
trator.
In case of the wire network,
check if the Ethernet cable is
properly connected.
In case of wireless network,
check if the optional Upgrade
Kit UK-213 is properly connect-
ed.
Check the settings of each serv-
er and network.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
Check the each server settings.
Or, check the password for Scan
to Server (SMB, FTP). Contact
your network administrator.
Remove the transmitted data
stored in the memory.
Remove the transmitted data
stored in the memory.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
bizhub 306/266
10.2