Konica Minolta bizhub 266 User Manual page 70

6
4
Press the OK key.
The destination is displayed.
% By pressing the , key, the file format and transmission settings for the compression coding method
can be changed. For details, refer to page 6-7.
5
Press the Start key.
6
Use the +/, key to select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press the OK key and go to Step 9.
% If [MANUAL] is selected, scanning size can be selected. Press the ) key and go to Step 7.
7
Use the +/, key to select desired scanning size, then press the OK key.
% By pressing [INCH] or [METRIC], the measuring scanning size can be changed.
8
Press the OK key.
9
Check the content of setting, then press the OK key.
Scanning starts and [NEXT PAGE?] is displayed.
% When scanning multiple sheets of the original, set the next original on the Original Glass, then press
the OK key. Repeat the above procedure for all sheets of the original.
10
When all the originals have been scanned, press the Start key.
Sending starts.
Tips
- To stop scanning, press the Clear/Stop key.
- If you are unable to send data, the TX Result Report is output.
-
To change the scanning quality setting, refer to page 5-11.
d
Reference
To cancel transmission of scanned data while standing by for transmission, press the Function key and select
[CANCEL RESERV.]. For details, refer to [User's Guide Fax].
6-6
150dpiBW TIFF 90%
TEXT/PHOTO
NEXT PAGE? (AUTO)
SCAN=OK (SEND=START)
Basic transmission method
AUTO
6.1
bizhub 306/266