Analog Devices Lite ADSP-21371 EZ-KIT System Manual page 3

Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from
Regulatory Compliance
The ADSP-21371 EZ-KIT Lite is designed to be used solely in a labora-
tory environment. The board is not intended for use as a consumer end
product or as a portion of a consumer end product. The board is an open
system design which does not include a shielded enclosure and therefore
may cause interference to other electrical devices in close proximity. This
board should not be used in or near any medical equipment or RF devices.
The ADSP-21371 EZ-KIT Lite has been certified to comply with the
essential requirements of the European EMC directive 2004/108/EC and
therefore carries the "CE" mark.
The ADSP-21371 EZ-KIT Lite has been appended to Analog Devices,
Inc. EMC Technical File (EMC TF) referenced DSPTOOLS1 and was
declared CE compliant by an appointed Notified Body (No.0673) as
listed below.
Notified Body Statement of Compliance: Z600ANA2.040 dated
June 22 2010.
Issued by: Technology International (Europe) Limited
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent
damage may occur on devices subjected to high-energy discharges. Proper
ESD precautions are recommended to avoid performance degradation or
loss of functionality. Store unused EZ-KIT Lite boards in the protective
shipping package.
56 Shrivenham Hundred Business Park
Shrivenham, Swindon, SN6 8TY, UK