Download Print this page
Analog Devices Linear Technology DC2692A Demo Manual

Analog Devices Linear Technology DC2692A Demo Manual

Advertisement

Quick Links

DESCRIPTION
Demonstration circuit 2692A-A features the
5-channel, 16-bit, 300mA, current source DACs with
10ppm/°C reference in a 5mm × 5mm QFN package.
This device features per-channel SoftSpan™ configura-
tion of 3.125mA to 300mA, a separate supply for each
output, and an internal switch to allow any output pin to
be connected to V
.
DEMO MANUAL DC2692A
5-Channel, 16-/12-Bit, 300mA,
SoftSpan Current Source DACs
LTC
2662,
Pin-compatible 12-bit versions are available for lower
®
resolution requirements on the DC2692A-B.
Design files and Bill of Materials for this circuit board
are available at
L, LT, LTC, LTM, Linear Technology, the Linear logo and Linduino are registered trademarks
and QuikEval and SoftSpan are trademarks of Analog Devices, Inc. All other trademarks are the
property of their respective owners.
Figure 1. Connection Diagram
LTC2662
http://www.linear.com/demo/DC2692A
dc2692af
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Linear Technology DC2692A and is the answer not in the manual?

Questions and answers

Summary of Contents for Analog Devices Linear Technology DC2692A

  • Page 1 L, LT, LTC, LTM, Linear Technology, the Linear logo and Linduino are registered trademarks output, and an internal switch to allow any output pin to and QuikEval and SoftSpan are trademarks of Analog Devices, Inc. All other trademarks are the –...
  • Page 2 DEMO MANUAL DC2692A ASSEMBLY OPTIONS MAX CURRENT PER ASSEMBLY TYPE PART NUMBER DAC CHANNELS BITS CHANNEL DC2692A-A LTC2662-16 300mA DC2692A-B LTC2662-12 300mA QUICK START PROCEDURE as shown in Figure 2. The control panel gives access 1. Download and install QuikEval™ from: to all of the LTC2662’s functionality including per- http://www.linear.com/quikeval channel SoftSpan ranges, toggling, power-down, etc.
  • Page 3 DEMO MANUAL DC2692A QUICK START PROCEDURE Using External Precision Resistor to Adjust MUX: Monitor Mux output. Allows surveying the DAC out- Full‑Scale Output Current puts under software control. Must be measured with a high impedance meter (output impedance is nominally 10kΩ). The DC2692 has an unstuffed resistor (R4) that can be OUT0 –...
  • Page 4 DEMO MANUAL DC2692A DEMONSTRATION BOARD IMPORTANT NOTICE Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use.

This manual is also suitable for:

Linear technology dc2692a-aLinear technology dc2692a-bLinear technology ltc2662-16Linear technology ltc2662-12