Table of Contents
Advertisement
Max Regeneration Indicator Light
This indicator light will illuminate to indicate
that Max Regeneration is on and capable.
When the switch is pressed, the following instrument
cluster messages will be seen:
•
"Max Regeneration On" – appears when the feature
is turned on.
•
"Max Regeneration Off" – appears when the feature
is turned off.
•
"Max Regeneration Unavailable" – appears when
the feature is requested, but the vehicle is unable to
comply. LED will flash for five seconds to indicate
unavailability
page 106.
Ready To Drive Indicator Light
This indicator light will illuminate to indicate
that the vehicle has enough power to be
driven, regardless of the speed of the
vehicle.
Plug Status Indicator Light
When plugged in, the green plug indicator
light will illuminate if the EVSE charging plug
is securely attached to the charging port.
This indicates that the plug is detected, but
doesn't mean it is charging. It will be accompanied with
a cluster message indicating the charge status:
•
"Plugged In And Charging"
•
"Plugged In And Waiting to Charge On A Set Schedule"
•
"Plugged in and Charging Complete"
NOTE:
The vehicle cannot be driven until it is unplugged.
WHITE INDICATOR LIGHTS
Adaptive Cruise Control (ACC) Ready
Light — If Equipped
This indicator light will illuminate when the
vehicle equipped with ACC has been turned
on but not set
page 138.
Cruise Control Ready Indicator Light
This indicator light will illuminate when the
cruise control is ready, but not set
page 137.
LaneSense Indicator Light — If Equipped
When the LaneSense system is ON, but not
armed, the LaneSense indicator light illumi-
nates solid white. This occurs when only left,
right, or neither lane line has been detected.
If a single lane line is detected, the system is ready to
provide only visual warnings if an unintentional lane
departure occurs on the detected lane line
page 152.
Set Speed Display Indicator Light
The Set Speed Display indicator light indi-
cates the set speed for the Cruise Control
and Adaptive Cruise Control (ACC) settings.
GETTING TO KNOW YOUR INSTRUMENT PANEL
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multifunc-
tion lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the multifunc-
tion lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are off, pull
the lever toward you for a temporary high beam on,
"flash to pass" scenario.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated Onboard
Diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and auto-
matic transmission control systems. When these sys-
tems are operating properly, your vehicle will provide
excellent performance and fuel economy, as well as
emissions well within current government regulations.
If any of these systems require service, the OBD II sys-
tem will turn on the Malfunction Indicator Light (MIL). It
will also store diagnostic codes and other information
to assist your service technician in making repairs.
Although your vehicle will usually be drivable and not
need towing, see an authorized dealer for service as
soon as possible.
117
3
Advertisement
Table of Contents
