Ruijie RG-RSR77 Series Installation And Initialization page 7

Hardware Installation
Preparations
Connection Cable Requirements
①
AC power: 100-240 V~/50-60 Hz
②
The power cable is a 3-wire cable. It is recommended that the single-phase three-wire socket
with neutral-point connector or multi-functional microcomputer power socket be used.
Installing the Power Cable
①
After confirming that the power switch of the router is turned to the OFF position, insert one
end of the power cable delivered with the router into the power module socket on the rear
panel of the router chassis, and then insert the other end into the AC power socket.
②
Turn the power switch of the router to the ON position.
③
Check whether the power indicator on the front panel of the router is on. If it is on, the power
connection is correct.
Installing the Grounding
Chassis to a
Specified Connecting
Position
Installing the
and
Supervisor
and Cards
Cables
Power-on
Check