Ruijie RG-RSR830 Series Hardware Installation And Reference Manual

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Ruijie RG-RSR830 Series Router

Hardware Installation and Reference Guide

Document version: V1.2

Date: 2024-07-22

Table of Contents

Need help?

Do you have a question about the RG-RSR830 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ruijie RG-RSR830 Series

Page 2 All rights are reserved in this document and this statement. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.
Page 3: Preface
Preface Intended Audience This document is intended for:  Network engineers  Technical support and servicing engineers  Network administrators Technical Support  Ruijie Networks website: https://www.ruijienetworks.com/  Technical support website: https://ruijienetworks.com/support  Case portal: https://caseportal.ruijienetworks.com  Community: https://community.ruijienetworks.com ...
Page 4: Table Of Contents
Contents Preface ..............................I 1 Product Overview ..........................1 1.2 RG-RSR830 ..........................2 1.2.1 Product Appearance ...................... 2 1.2.2 Package Contents ......................5 1.2.3 Technical Specifications ....................5 1.2.4 LEDs and Buttons ......................7 1.3 RG-RSR830-P ........................... 8 1.3.1 Product Appearance ...................... 8 1.3.2 Package Contents ......................
Page 5 2.1.4 Storage ......................... 26 2.2 Installation Environment Requirements ................... 26 2.2.1 Load Bearing ........................ 26 2.2.2 Ventilation ........................26 2.2.3 Clearance ........................26 2.2.4 Temperature and Humidity ................... 26 2.2.5 Cleanliness ........................27 2.2.6 Anti-interference ......................28 2.2.7 Surge Protection ......................28 2.2.8 Others ..........................
Page 6 3.7 Verifying Installation ......................... 35 3.7.1 Checking the Device ....................35 3.7.2 Checking the Cable Connection .................. 35 3.7.3 Checking Power Supply ....................35 4 Verifying the Operating Status ......................36 4.1 Setting Up the Configuration Environment ................36 4.2 Powering On the Device ......................36 4.2.1 Checklist Before Power-on ..................
Page 7: Product Overview
Warning  In a domestic environment, the RG-RSR830 series may cause radio interference.  The RG-RSR830 series routers are not suitable for use in locations where children are likely to be present. Warning  Replacement of a battery with an incorrect type that can defeat a safeguard.
Page 8: Rg-Rsr830
Hardware Installation and Reference Guide Product Overview  A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable. RG-RSR830 1.2.1 Product Appearance The RG-RSR830 provides eight GE LAN electrical ports (which can switch to WAN ports), two GE WAN electrical ports, one USB 2.0 port, and one FUNC button, as shown in Figure 1-1.
Page 9 Hardware Installation and Reference Guide Product Overview Port/Button Description CTL LED Controller status LED USB LED USB port status LED Ports GE2–GE9 Electrical LAN ports for data transmission Ethernet electrical Ethernet electrical port status LED port LED Ports GE0–GE1 Electrical WAN ports for data transmission Console port Management port 12 V power port...
Page 10 Hardware Installation and Reference Guide Product Overview 3. Product Nameplate Figure 1-4 Nameplate of the RG-RSR830 Figure 1-5 Nameplate Style...
Page 11: Package Contents
Pre-installed on the device Note To obtain relevant product documentation, log in to the official website of Ruijie Networks (https://www.ruijienetworks.com). Choose Support > Documentation and Download. On the displayed page, select the corresponding product category to find the product and download relevant documentation.
Page 12 Hardware Installation and Reference Guide Product Overview Port Specifications RG-RSR830 SIC-5G-G: 5G NR in global bands single card, small plug-in card SIC-2SFP: expansion gigabit optical module plug-in card 2. Power Supply and Consumption Table 1-5 Power Supply and Consumption Power Supply and Consumption RG-RSR830 36 W Power Adapter: Input power supply...
Page 13: Leds And Buttons
Hardware Installation and Reference Guide Product Overview 4. Dimensions and Weight Table 1-7 Dimensions and Weight of the RG-RSR830 Dimensions and Weight RG-RSR830 Unit Dimensions (W x D x 260 mm x 171 mm x 38 mm (10.24 in. x 6.73 in. x 1.50 in.) Shipping dimensions (W x D 386 mm x 302 mm x 90 mm (15.20 in.
Page 14: Rg-Rsr830-P
Hardware Installation and Reference Guide Product Overview Off: The SD-WAN function is unavailable. Off: No USB flash drive is inserted. USB port status LED Solid green: A USB flash drive is identified. Solid green: The port is Up at a rate of 1 Gbps. Blinking green: The port is receiving or sending data at a rate of 1 Gbps.
Page 15 Hardware Installation and Reference Guide Product Overview 1. Front Panel Figure 1-7 Front View of the RG-RSR830-P Table 1-10 Ports and Buttons on the Front Panel Port/Button Description FUNC button Multi-function button USB port USB 2.0 port, for connecting to the USB flash drive SYS LED System status LED CTL LED...
Page 16 Hardware Installation and Reference Guide Product Overview 2. Rear Panel Figure 1-8 Rear View of the RG-RSR830-P 3. Product Nameplate Figure 1-9 Nameplate of the RG-RSR830-P Figure 1-10 Nameplate Style...
Page 17: Package Contents
Pre-installed on the device Note To obtain relevant product documentation, log in to the official website of Ruijie Networks (https://www.ruijienetworks.com). Choose Support > Documentation and Download. On the displayed page, select the corresponding product category to find the product and download relevant documentation.
Page 18 Hardware Installation and Reference Guide Product Overview Port Specifications RG-RSR830-P SIC-LTE-GS: LTE card (Cat-6, 2 x SIM, active-standby) SIC-LTE-GD: LTE card (Cat-6, 2 x SIM, active-active) Expansion Module SIC-5G-G: 5G NR in global bands single card, small plug-in card SIC-2SFP: expansion gigabit optical module plug-in card 2.
Page 19 Hardware Installation and Reference Guide Product Overview Environment and Reliability RG-RSR830-P IP rating IP30 Mean Time Between Failure 100000 hours (11 year) (MTBF) Caution The RG-RSR830 adopts a fanless design. Therefore, maintain sufficient clearance around the router for air circulation. 4.
Page 20: Leds And Buttons
Solid yellow: indicates the PoE status. EU and UK declaration of conformity Ruijie Networks Co., Ltd. hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863, and UK Radio Equipment Regulations 2017.
Page 21: Expansion Modules
Division Multiple Access (WCDMA), Time Division Long Term Evolution (TD-LTE), Frequency Division Duplexing-Long Term Evolution (LTE FDD) standards. It can be inserted into the RG-RSR830 series router with service interface card (SIC) slots to enable wired routing and wireless data transmission on 3G/4G public network.
Page 22 Hardware Installation and Reference Guide Product Overview Table 1-18 Panel Button and LED Button and LED Description LTE antenna connector LTE antenna connector Button of the SIM card slot Button of the SIM card slot, with SIM card slots inside LTE status LED LTE status LED Note...
Page 23 Hardware Installation and Reference Guide Product Overview Communication Standard 3GPP E-UTRA Release 12 Safety Regulation EN 62368-1 EMC Regulation EN 301 489-1 EN 301 489-52 Radio Standard EN301 908-1 EN301 908-2 EN301 908-13 EN IEC 62311 3. Product Nameplate Figure 1-12 Nameplate of the SIC-LTE-GD Figure 1-13 Nameplate Style...
Page 24: Sic-Lte-Gs
The SIC-LTE-GS is a 4G Dual SIM Single Standby module that supports the WCDMA, TD-LTE, LTE FDD standards. It can be inserted into an RG-RSR830 series router with SIC slots to enable wired routing and wireless data transmission on 3G/4G public network. The SIC-LTE-GS has two LTE antenna interfaces, as...
Page 25 Hardware Installation and Reference Guide Product Overview LTE-FDD: Class 3 (23 dBm± 2 dB) Transmit power LTE-TDD: Class 3 (23 dBm± 2 dB) WCDMA: Class 3 (23 dBm± 2 dB) Excluding antennas: 155 mm x 93 mm x 21 mm (6.10 in. x 3.66 in. x 0.83 in.) Unit dimensions (W x D x H) Including external antennas: 155 mm x 138.3 mm x 176.5 mm (6.10 in.
Page 26: Sic-5G-G
The SIC-5G-G is a Dual SIM Single Standby 5G data module that supports the WCDMA, TD-LTE, LTE FDD, and 5G standards. It can be inserted into the RG-RSR830 series device with SIC slots to enable wired routing and wireless data transmission on 3G/4G/5G public network. The SIC-5G-G has four LTE antenna interfaces,...
Page 27 Hardware Installation and Reference Guide Product Overview Table 1-25 Panel LED Name Description LED Status Off: System services are not available. Solid green: 5G services are available, with strong signal strength. SIM card status Blinking green: 5G services are available, with weak signal strength. Solid orange: 4G services are available, with strong signal strength.
Page 28: Sic-2Sfp
Hardware Installation and Reference Guide Product Overview 3. Product Nameplate Figure 1-18 Nameplate of the SIC-5G-G Figure 1-19 Nameplate Style 1.5.4 SIC-2SFP 1. Product Appearance The SIC-2SFP is a 1000M expansion module for optical transceiver expansion. It can be inserted into the RG- RSR830 series device with SIC slots and provides two 1000M SFP ports, as shown in Figure 1-20.
Page 29 Hardware Installation and Reference Guide Product Overview Table 1-27 Panel Button and LED Button and LED Description SFP port SFP port Port status LED SFP port status LED Table 1-28 Panel LED Name Description LED Status Off: The port is Down. Solid green: The optical port is Up at the rate of 1G.
Page 30 Hardware Installation and Reference Guide Product Overview 3. Product Nameplate Figure 1-21 Nameplate of the SIC-2SFP Figure 1-22 Nameplate Style...
Page 31: Preparing For Installation
Hardware Installation and Reference Guide Preparing for Installation Preparing for Installation Safety Precautions Note  To avoid personal injury and device damage, carefully read the safety precautions before you install the device.  The following safety precautions do not cover all possible dangers. 2.1.1 General Safety Precautions ...
Page 32: Storage
Hardware Installation and Reference Guide Preparing for Installation  Check whether there are potential risks in the working area. For example, check whether the ground is wet.  Find out the position of the indoor emergency power switch before installation. Cut off the power switch in the case of accidents.
Page 33: Cleanliness
Hardware Installation and Reference Guide Preparing for Installation  A high temperature can accelerate the aging process of insulation materials, greatly reducing the reliability of the device and severely affecting its service life. Note The ambient temperature and humidity are measured at the point that is 1.5 m (59.06 in.) above the floor and 0.4 m (15.75 in.) before the device rack when there is no protective plate in front or at the back of the rack.
Page 34: Anti-Interference
Hardware Installation and Reference Guide Preparing for Installation 2.2.6 Anti-interference  Take effective measures to prevent interference from power grid to the power supply system.  Keep the device far away from the grounding facility or lightning and grounding facility of the power device as much as possible.
Page 35: Installation
Hardware Installation and Reference Guide Installation Installation Secure the RG-RSR830 indoors. Caution Before installing the device, make sure that you have carefully read the requirements described in Chapter 2 .
Page 36: Installation Procedure
Hardware Installation and Reference Guide Installation Installation Procedure Figure 3-1 Installation Procedure Checking Before Installation Carefully plan and arrange the installation location, networking, power supply, and cabling before installing the device.
Page 37: Precautions
Hardware Installation and Reference Guide Installation The following requirements must be met before installation:  The installation location provides sufficient clearance for heat dissipation.  The installation location meets temperature and humidity requirements of the device.  The power supply and required current are available in the installation location. ...
Page 38: Installing A Sim Card On A Lte Expansion Module
Hardware Installation and Reference Guide Installation  Do not place the router in a place where it will be exposed to moisture or excessive heat.  Keep the router away from devices with strong electromagnetic interference, such as Bluetooth devices, microwave ovens, or cordless phones.
Page 39 Hardware Installation and Reference Guide Installation Figure 3-4 Removing the Rear Faceplate of the Device (2) Align the expansion module with the opening edge of the expansion module slot in the rear panel of the router, and push the expansion module into the router until the expansion module is flush with the rear panel of the router.
Page 40: Connecting Cables
Hardware Installation and Reference Guide Installation Figure 3-6 Installing the Antenna Connecting Cables Connect a twisted pair cable to the LAN port of the device. For details about the twisted-pair cable connection sequence supported by the device, see Connectors and Media.
Page 41: Verifying Installation
Hardware Installation and Reference Guide Installation Verifying Installation 3.7.1 Checking the Device  Verify that the external power supply matches the device.  Verify that the device is securely fastened. 3.7.2 Checking the Cable Connection  Make sure that the twisted pair cable matches the port. ...
Page 42: Verifying The Operating Status
Hardware Installation and Reference Guide Verifying the Operating Status Verifying the Operating Status Setting Up the Configuration Environment Power on the router using a power adapter. When setting up the environment, pay attention to the following points:  When the device is powered through a power adapter, ensure that the power cord is properly connected and meets safety requirements.
Page 43: Monitoring And Maintenance
You can run related commands on the CLI of the device to remotely monitor the device status, including:  Port configuration and status  System logs Note  For details about the commands, see the configuration guide.  The device supports remote maintenance. Hardware Maintenance If the hardware is faulty, contact Ruijie technical support.
Page 44: Faqs
Check whether the device is installed properly Check whether the power er supply is properly connected Check whether LEDs are normal Check whether cables are properly connected to ports Contact Ruijie technical support to check k whether hardware faults exist Common Faults 6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Installed Check whether the device at the other end of the Ethernet cable is working properly.
Page 45: Appendix
Appendix Mini-GBIC (SFP) Modules Ruijie provide supporting SFP modules (mini-GBIC modules) based on the port types of switch modules. You can select a module to suit your specific needs. This document provides models and technical specifications of some 1000M SFP modules for reference. For details about the technical specifications, see the Ruijie Transceiver Installation and Reference Guide.
Page 46 Hardware Installation and Reference Guide Appendix GE-SFP-LX20-SM1550- 1550TX/131 Single- BIDI mode Table 7-2 Cabling Specifications of SFP Modules Optical Fiber Max Cabling SFP Model Port Type Core Size (um) Type Distance 62.5/125 275m MINI-GBIC-SX-MM850 Multi-mode 50/125 550m MINI-GBIC-LX-SM1310 Single-mode 9/125 10 km 62.5/125 275 m...
Page 47: Connectors And Media
Hardware Installation and Reference Guide Appendix GE-SFP-LX Single-mode 9/125 10 km Cat 5 unshielded or shielded twisted Mini-GBIC-GT RJ45 cable 100 m pair cables or higher Cuation  An optical module is a laser transmitter. Do not stare at any light source to prevent it from burning your eyes.
Page 48: Cabling Recommendations
Hardware Installation and Reference Guide Appendix 100BASE-TX/10BASE-T uses CAT 3, CAT 4, and CAT 5 100-ohm UTP/STP, and 1000BASE-T uses CAT 5 100- ohm UTP/STP for connections with a maximum distance of 100 meters (328 ft.). Table 7-3 shows 100BASE- TX/10BASE-T pin assignments.
Page 49 Hardware Installation and Reference Guide Appendix ○ The minimum bend radius of a high-speed cable such as an SFP+ cable should be over five times its diameter. If the cable is constantly bent, plugged, or unplugged, the bend radius should be over 10 times greater than its diameter.
Page 50 Hardware Installation and Reference Guide Appendix Figure 7-4 Bundling Up Cables (2) ○ When cables need to be bent, bundle them up but do not tie cable them where the cables will be bent, as shown in Figure 7-5. Figure 7-5 Bundling Up Cables (3) ○...
Page 51 Hardware Installation and Reference Guide Appendix Figure 7-6 Cable Fastening ① Flat washer ③ Spring washer Notes: ② Nut ④ Flat washer ○ When using a stiff cable, fix it near the cable lug to avoid stress on the lug and cable. ○...

This manual is also suitable for:

Rg-rsr830Rg-rsr830-p